MDC Motorsports Product Page
The Following parts have a SUGGESTED RETAIL PRICE.
Our authorized vendors' pricing may vary.
7MGTE
CT26 SOFT LINE KIT, $135
Direct
bolt on. No fabrication required.
(DASH 4 FEED LINE, CRIMPED)
-CT26 COMBO FLANGE
-METRIC x -4 FEED FITTING
-7M DASH 10 RETURN FLANGE
- -DASH 10 RETURN LINE, CRIMPED
7MGE
CT26 SOFT LINE KIT, $165
Kit
allows customer to run with / without oil pressure sending unit
-2 FEET OF DASH 4 FEEDLINE
-CT26 COMBO FLANGE
-2 FEET DASH 10 LINE
-STRAIGHT ALUMINUM DASH 10 FITTING
-45 DEG ALUMINUM
DASH 10 FITTING (not pictured, see
catalog)
-DASH 10 STEEL BUNG
-METRIC FEMALE, FEMALE, MALE TEE
-BSP TO DASH 4 FEED FITTING
-90 DEG ALUMINUM DASH 4 FITTING
-STRAIGHT ALUMINUM DASH 4 FITTING
1JZ
& 2JZ CT26 PRO KIT $205
Adapt
a CT26 to a 1JZ or 2JZ
-2 FEET OF DASH 4 FEEDLINE
-CT26 COMBO FLANGE
-2 FOOT DASH TEN LINE
-STRAIGHT ALUMINUM DASH 10 FITTING
-45 DEG ALUMINUM
DASH 10 FITTING (not pictured, see
catalog)
-DASH 10 1J/2J
RETURN FLAGNE (not pictured, see catalog)
-90 DEG ALUMINUM DASH 4 FITTING
-STRAIGHT ALUMINUM DASH 4 FITTING
-METRIC TWIN TURBO
FEED PLUG (plugs rear or front twin oil
feed port)
-METRIC PLUG WASHER WITH O RING
-METRIC TO DASH 4 BLOCK FEED FITTING
1JZ
& 2JZ T04 PRO KIT $195
Adapt
a T3/T4 turbo to a 1JZ or 2JZ
-3 FEET OF DASH 4 FEEDLINE
-TO4 DASH 10 RETURN FLANGE
-1 FOOT DASH TEN LINE
-STRAIGHT ALUMINUM DASH 10 FITTING
-45 DEG ALUMINUM
DASH 10 FITTING (not pictured, see
catalog)
-DASH 10 1J/2J
RETURN FLAGNE (not pictured, see catalog)
-90 DEG ALUMINUM DASH 4 FITTING
-STRAIGHT ALUMINUM DASH 4 FITTING
-ALUMINUM DASH 4
TO ¼ OR 1/8 NPT T3/T4 FEED FITTING (not
pictured, see catalog)
-METRIC TWIN TURBO
FEED PLUG (plugs rear or front twin oil
feed port)
-METRIC PLUG WASHER WITH O RING
-METRIC TO DASH 4 BLOCK FEED FITTING
7MGTE
TO4 PRO KIT $175
Adapt
a T3/T4 turbo to a 7mgte
-3 FEET OF DASH 4 FEEDLINE
-METRIC TO DASH 4 BLOCK FEED FITTING
-ALUMINUM DASH 4
TO ¼ OR 1/8 NPT T3/T4 FEED FITTING
-TO4 DASH 10 RETURN FLANGE
-DASH 10 7MGTE RETURN FLANGE
-1 FOOT DASH TEN LINE
-STRAIGHT ALUMINUM DASH 10 FITTING
-45 DEG ALUMINUM
DASH 10 FITTING (not pictured, see
catalog)
-90 DEG ALUMINUM DASH 4 FITTING
-STRAIGHT ALUMINUM DASH 4 FITTING
7MGE
TO4 PRO KIT $175
Adapt
a T3/T4 turbo on a 7mge
-3 FEET OF DASH 4 FEEDLINE
-BSP TO DASH 4 FEED FITTING
-ALUMINUM DASH 4
TO ¼ OR 1/8 NPT T3/T4 FEED FITTING
-TO4 DASH 10 RETURN FLANGE
-DASH 10 STEEL BUNG
-2 FEET DASH TEN LINE
-STRAIGHT ALUMINUM DASH 10 FITTING
-45 DEG ALUMINUM
DASH 10 FITTING (not pictured, see
catalog)
-90 DEG ALUMINUM DASH 4 FITTING
-STRAIGHT ALUMINUM DASH 4 FITTING
1JZ
& 2JZ SOFT LINE KIT $215
Install
the Ct12A or Ct12B with ease!
(Kit picture not available. See
individual pictures in catalog)
-2 CT26 COMBO FEED FLANGES
-2 METRIC TO DASH 4 FEED FITTINGS
-3 FEET DASH 4 FEED LINE
-3 FEET DASH 10 RETURN LINE
-2 DASH 10 STRAIGHT ALUMINUM FITTINGS
-2 DASH 10, 45 DEG ALUMINUM FITTINGS
-ALUMINUM OIL RETURN MANIFOLD WITH DASH 10 FITTINGS (must provide stock core for welding)
1JZ
& 2JZ TWIN TURBO PRO KIT $225
Install
a set of aftermarket twins on the 1JZ or 2JZ
(Kit
picture not available. See individual pictures in catalog)
-2
TO4 DASH 10 RETURN FLANGES (T28 or GT
return flanges available upon request)
-2 METRIC TO DASH 4 FEED FITTINGS
-3 FEET DASH 4 FEED LINE
-3 FEET DASH 10 RETURN LINE
-(QTY 2) ¼” OR 1/8” NPT TO DASH 4 FEED FITTINGS
-2 DASH 10 STRAIGHT ALUMINUM FITTINGS
-2 DASH 10, 45 DEG ALUMINUM FITTINGS
-ALUMINUM
OIL RETURN MANIFOLD WITH DASH 10 FITTINGS (must
provide stock core for welding)
DASH
10 LINE $20
Steel
braided rubber core line, priced per foot
DASH
4 LINE $12
Steel
braided rubber core line, priced per foot
1JZ
& 2JZ METRIC FEED PORT PLUG $20.00
Steel,
with sealing washer. Plugs off 1JZ or 2JZ stock twin oil port.
METRIC
BSP, BSP, BSP TEE FITTING $21.75
Allows
the use of stock oil sending unit with oil feed line on 7m
NA-T
project (pictured left, must use fitting
below to use sending unit and provide turbocharger oil feed)
METRIC
BSP TO DASH 4 FEED FITTING $12.50
Allows
the use of the 7mge oil sending unit port to provide turbocharger oil feed (pictured
right)
1/8”
OR ¼” NPT TO DASH 4 FEED $12
Oil
feed for T3/T4 turbos
METRIC
TO DASH 4 OIL FEED $15
Oil
feed fitting for 7MGTE, 1JZ-T, 2JZ-T
DASH
10 STEEL WELDABLE BUNG $8
Dash
10 bung for turbo to pan oil return systems
DASH
4 STRAIGHT ALUMINUM FITTING $12
Aluminum
racing fitting. (Pictured right)
DASH
4, 90 DEG ALUMINUM FITTING $23.75
Aluminum
racing fitting (Pictured left)
DASH
10 STRAIGHT ALUMINUM FITTING $21
Aluminum
racing fitting
DASH
10, 45 DEG ALUMINUM FITTING $41.50
Aluminum
racing fitting
T3
/ TO4 DASH 10 RETURN FLANGE $20
Run a dash 10 return line from turbo oil return (Available in -12 also for $5 more)
1JZ
/ 2JZ DASH 10 RETURN FLANGE $25
Run
a dash 10 return line from turbo oil return (Available
in -12 also for $5
more)
7MGTE
DASH 10 RETURN FLANGE $32
Run
a dash 10 return line from turbo oil return (Available
in -12 also for $5
more)
CT12A/CT12B/CT20/CT26
COMBO FLANGE $55
Run
dash 4 and dash 10 lines to a CT based turbo
100%
rebuilt Toyota Ct26 with Garrett 57 trim compressor wheel.
425
RWHP capable (must provide core to turn
in.)
With
or without clipping (available in 4 to 10 deg clips)
100%
rebuild Toyota Ct26 with Garrett GT 57 trim compressor wheel.
Uses the latest GT series compressor wheel for quicker spool, greater
efficiency islands, and lower boost temps.
435+
RWHP capable (must
provide core to turn in)
MA70/71
ADJUSTABLE SWAY BAR ENDLINKS $250
6061-T6
Racing endlinks for the MK3 supra chassis. Fully adjustable. Available front set
($135), Rear set ($135), or all 4 corners ($250).
R154
Includes all bearings, syncros and seals. DOES NOT INCLUDE SHIFTER BUSHINGS OR PARTS AS PICTURED.
OEM
quality including NSK & Naichi bearings.
MILD
STEEL 7M J-TUBE BLOCK OFF PLATE $20
Does
not include gasket. For elimination of fuel J-Tube on 7m series engines.
AEROMOTIVE
AFPR MOUNTING PLATE $20
Mount
an AFPR the way it was designed, safely and securely.
TURBO
RISER MANIFOLDS / ADAPTORS
T4
/ T4 OR T6 RISER, MILD STEEL $150
T3
/ T4 OR T6 RISER, MILD STEEL $155
T2
/ T3 OR T4 RISER, MILD STEEL $160
T4
/ T4 OR T6 RISER, STAINLESS $175
T3
/ T4 OR T6 RISER, STAINLESS $180
T2
/ T3 OR T4 RISER, MILD STEEL $185
(Risers
come standard @ 3
1/2” tall. Other heights available)
